setstats
©2011 Mercury Equipment Inc. All Rights Reserved.
  • "X" grind - Enhanced grind geometry significantly
    improves out-of-box sharpness with substantial speed
    improvement in boring and bias (undercut) modes  
  • Blued cutters provide superior corrosion resistance and
    improved strength
  • Tumbled parts, improved joint articulation, reduces friction
    and stretch
  • Offset ramp-shaped depth gauges reduce roughness,
    helps prevent cutter from diving into the sidewall of the
    cut  
  • Clean ground gullets, increase chip flow and evacuation  
  • LubriLink™ tie straps help keep oil where it's needed - on
    the chain  
  • Top-plate witness mark makes accurate sharpening
    easier  
  • Patented Chain Steel - OREGON OCS-01 steel is
    patented and provides greater durability, especially in
    cold cutting conditions.
  • Vibe-Ban™ chassis design reduces vibration 25% or
    more at the handles  
Features
  • 72LGX: 3/8" pitch, .050" gauge
  • 73LGX: 3/8" pitch, .058" gauge
  • 75LGX: 3/8" pitch, .063 gauge
Skip Sequence:
  • 72JGX: 3/8" pitch, .050" gauge
  • 73JGX: 3/8" pitch, .058" gauge
  • 75JGX: 3/8" pitch, .063 gauge
Recommended Saw Size: 50 to 100cc, Bar Length: 16" - 36" (41-
91cm)

WARNING: This Oregon saw chain is capable of kickback and
could result in serious injury to the saw operator or bystanders.
Do not use this chain unless you are experienced in dealing
with kickback. Saw chain with reduced kickback potential is
available.
Specs
The ideal chain for high-production cutting of clean wood
72, 73, 75LGX/JGX
SUPER GUARD®