©2011 Mercury Equipment Inc. All Rights Reserved.
  • Semi-chisel cutters provide an aggressive cutting edge
    with a forgiving sharpening profile and good stay-sharp
  • "X" grind - Enhanced grind geometry significantly
    improves out-of-box sharpness with substantial speed
    improvement in boring and bias (undercut) modes  
  • Blued cutters provide superior corrosion resistance  
  • Vibe-Ban™ chassis design reduces vibration 25% or
    more at the saw handles  
  • LubriLink™ tie straps help keep oil where it's needed - on
    the chain  
  • LubriWell™ oil holes help carry oil around the full length
    of the guide bar's groove  
  • 91VXL 3/8" pitch, .050 gauge
  • Recommended Saw Size: up to 42cc, Bar Length: up to
    18" (46cm)

WARNING: This Oregon saw chain is capable of kickback and
could result in serious injury to the saw operator or bystanders.
Do not use this chain unless you are experienced in dealing
with kickback. Saw chain with reduced kickback potential is
This new cutting chain features a longer top plate,
an aggressive cutting edge and a forgiving sharpening profile